Pair draw count filter

dimmere19

Dave,

can you tell me why the below setup does not produce any numbers. My goal was to select m3c on the L1 side. And m3c on the m3c side. Im

bmehmet

dimmere19

What state? ....I need to see the DRAW column to know what the PAIR combination is.

bmehmet

dimmere19

Also, the new PAIRS page will do this all for you. It's an AUTOMATED page. We should be completed coding it next week.

bmehmet

dimmere19

First answer....Lets understand how the DRAW COUNT filter works then we can understand why no numbers are produced with your selections.

The filter uses the L1 page and COMBINES it with the 15 M3C pages. You are asking the program to COMBINE the 4 GREEN columns from L1+M3C to create 8 combined GREEN PAIR patterns.

CONCLUSION

We didn't have this setup produce numbers because there would be too many and defeats the purpose of REDUCING the PAIRS/NUMBERS. BUT I think to clear up confusion, we will code the pairs/numbers in.

DrawCount CHART

You can use this CHART FORM to help you REDUCE the PAIRS. BUT the new PAIRS page we are coding now will AUTOMATE all this for you. THUS, IF you think L1 page will produce a GREEN in column M3C, you just grab those PAIRS/NUMBERS the new PAIRS page will show you.

VIDEO TUTORIAL

I'll make a video tutorial today explaining how to use the DRAW COUNT filter

dimmere19

bmehmet

I’m looking at NY

dimmere19

Also. With the recent change to the draw column how can I replicate it to reflect if I just want green l1-l4. There are 4 columns now. Base on how it was previously. What column can I select

bmehmet

dimmere19

how can I replicate it to reflect if I just want green l1-l4. There are 4 columns now. Base on how it was previously. What column can I select

But WHICH PAGE are you playing on? L1 or M3C?

L1 Page (Green+Green = L1+L4)

M3C Page (Green+Green = L1+L4)

mithod0833

bmehmet
Since the yellow area has the most wins, and most numbers are repeats, have you seen any data that the repeat numbers hit more often than the none repeat numbers?

Thanks for this, looks like its gonna get very interesting,,,,,,

dimmere19

bmehmet

also the selection of the green pair filter with no strips is based on L1 right?

dimmere19

Thank you, i watch the video and i think i am getting it. so, the original setup for the pair draw count was based on m3c draw count? if i want to get the numbers that would be equivalent to the setup below i would select the last column of the 4 columns?

dimmere19

you may have to click the picture to see it in full

bmehmet

dimmere19

What page are you on. what exactly do want to do?

dimmere19

bmehmet

I was on the mobile page. i used the history of the pair variations (solid green , green with stripe) to then select the filter. but with the change i do not see the stripes. the pairs now just show solid green, brown and red

bmehmet

dimmere19
Yes. We made it easier for everyone. We are going to modify the other pages.

HOWEVER, you are going to like this change. The colored STRIPS were the true color of the Draw Count column. When you saw a green strip, it ment the true color was Green.

I’ll mention it in another video and we will be modifying the 1st AUTO-PREDICT page

joez

Im having good luck with the repeats.

mithod0833

joez
Thats what i been seeing on my end, looks like 70-80% are repeats, with one pairsum its not that many non-repeats but if you play more than one pairsum looks like 20% or so,

Think i stick with the repeats for now, and use the non repeat money for the repeats. Thanks Joez!